HPLC-ICP-MS在植物有机硒形态分析中的应用现状

植物是人们摄取硒的主要来源,富硒植物中富含可开发利用的有机硒,我国湖北恩施高硒地区富硒植物资源丰富亟待开发利用。植物中硒的形态分析是研究开发富硒植物资源的基础,而高效液相色谱与电感耦合等离子体质谱联用技术(HPLC-ICP-MS)是目前硒形态分析使用最为广泛的技术,它在样品的前处理、分析灵敏度、准确性等方面均具有优势,可以实现富硒植物中含硒生物大分子、硒形态以及与氨基酸结合位点及机理的分析。因此作者综述了植物样品的预处理过程,介绍了HPLC-ICP-MS联用技术在测定植物硒形态及其应用方面的研究成果,为我国富硒植物、富硒产品中硒形态的分析测定、开发富硒植物资源提供指导。     

佛山高明河水环境多环芳烃的分布特征与通量研究

利用液液萃取法和气相色谱-质谱方法对佛山境内高明河水环境多环芳烃（PAHs）进行了测定,并对PAHs的分布特征与通量进行了初步研究.结果表明高明河水环境中16种优控PAHs的浓度范围在41.6～375.6 ng/l之间,从上游到下游总体呈递增的趋势,其下游浓度偏高可能与荷城街道较为密集的工业和人口分布有关.高明河水环境PAHs的总含量高于欧美一些低污染水域,但低于国内一些主要河流.高明河PAHs年通量约为333.8 kg.     

基于土壤气调查的废弃工业场地人体健康风险评估研究

土壤气采样和分析是蒸气侵入评估的一个常用的工具.以某废弃化工场地为研究区,采集污染区域10个点位处的土壤气（编号SG1至SG10）,并分析土壤气中的苯、乙苯、四氯化碳、三氯乙烯、四氯乙烯和三氯甲烷等挥发性有机物.根据测定的土壤气体浓度,结合Johnson ＆amp;Ettinger（J＆amp;E）侵入模型评估了该废弃场地土壤气中挥发性有机物侵入带来的人体健康风险.风险评估结果表明,SG5与SG6处非致癌风险指数大于1,而10个采样点位中有9个（除SG8处）的单一污染物可接受致癌风险均超过1.0E-6.相对于非致癌风险,致癌风险存在面更加广泛,同时程度也比较严重,在进行场地再开发之前需要考虑场地修复等风险管理措施.     

不同离子对黑土胶体在土壤中运移的影响

黑土样品采自于黑龙江海伦市,提取胶体并对其主要理化性质进行定性定量表征,通过淋滤实验研究胶体在土柱中的运移特征以及不同离子及其强度对胶体运移的影响。结果显示:所提取胶体粒径与理论计算基本吻合,粒径主要分布在2~5μm;当pH由4上升到9时,胶体的zeta电位则由-26.43mV降低到-34.52mV;红外光谱显示胶体颗粒的有机机团主要为-OH、CH-、C=O、多糖;X射线衍射表明其主要矿物组成是石英(56.9%)。不同离子及其强度对胶体的在土壤中的运移有较为明显的影响,当pH由4增加到9时,k值由6.020×10-4降低至3.858×10-4,Ca2+、K+、Na+当离子强度由0.5mmol/L变化到0.001mmol/L时,k值分别由6.087×10-4降低至4.024×10-4、5.518×10-4降低至3.818×10-4、5.401×10-4降低至4.109×10-4。     

氧化亚铁硫杆菌对黄铜矿的生物氧化研究

针对矿区硫化矿氧化产生的酸性矿山废水(AMD)对生态环境造成严重影响的问题,以矿区常见的黄铜矿(CuFeS2)为研究对象,采用已筛选的氧化亚铁硫杆菌(Acidithiobacillus ferrooxidans,简称A.f菌)为实验菌株,探讨在A.f菌作用下黄铜矿的氧化过程。实验结果表明,A.f菌可显著促进黄铜矿的氧化,第18天有菌体系中的铜离子浓度是无菌体系中的5倍;同时细菌可促进溶液中Fe2+氧化为Fe3+,使氧化还原电位升高,从而对黄铜矿保持较高的氧化速率,并导致体系的pH值降低;还发现黄铜矿的氧化过程中可形成中间产物方黄铜矿(CuFe2S3),而细菌氧化还可产生硫磷化钴(CoPS),中间产物的形成并没有明显延缓黄铜矿的氧化速率;生物氧化可造成矿样表面侵蚀多坑,可能是细菌对黄铜矿的直接氧化作用造成的。由于黄铜矿的生物氧化明显控制其氧化进程,抑制黄铜矿的生物氧化对酸性矿山废水的源头治理具有十分重要的意义。     

Fouling distribution in forward osmosis membrane process

Fouling behavior along the length of membrane module was systematically investigated by performing simple modeling and lab-scale experiments of forward osmosis （FO） membrane process. The flux distribution model developed in this study showed a good agreement with experimental results, validating the robustness of the model. This model demonstrated, as expected, that the permeate flux decreased along the membrane channel due to decreasing osmotic pressure differential across the FO membrane. A series of fouling experiments were conducted under the draw and feed solutions at various recoveries simulated by the model. The simulated fouling experiments revealed that higher organic （alginate） fouling and thus more flux decline were observed at the last section of a membrane channel, as foulants in feed solution became more concentrated. Furthermore, the water flux in FO process declined more severely as the recovery increased due to more foulants transported to membrane surface with elevated solute concentrations at higher recovery, which created favorable solution environments for organic adsorption. The fouling reversibility also decreased at the last section of the membrane channel, suggesting that fouling distribution on FO membrane along the module should be carefully examined to improve overall cleaning efficiency. Lastly, it was found that such fouling distribution observed with co-current flow operation became less pronounced in counter- current flow operation of FO membrane process.     

Compositions and sources of organic acids in fine particles (PM2.5) over the Pearl River Delta region, south China

Organic acids as important constituents of organic aerosols not only influence the aerosols' hygroscopic property, but also enhance the formation of new particles and secondary organic aerosols. This study reported organic acids including C14–C32fatty acids, C4–C9dicarboxylic acids and aromatic acids in PM2.5collected during winter 2009 at six typical urban, suburban and rural sites in the Pearl River Delta region. Averaged concentrations of C14–C32fatty acids, aromatic acids and C4– C9 dicarboxylic acids were 157, 72.5 and 50.7 ng/m3, respectively. They totally accounted for 1.7% of measured organic carbon. C20–C32fatty acids mainly deriving from higher plant wax showed the highest concentration at the upwind rural site with more vegetation around, while C14–C18fatty acids were more abundant at urban and suburban sites, and dicarboxylic acids and aromatic acids except 1,4-phthalic acid peaked at the downwind rural site. Succinic and azelaic acid were the most abundant among C4–C9dicarboxylic acids, and 1,2-phthalic and 1,4-phthalic acid were dominant aromatic acids. Dicarboxylic acids and aromatic acids exhibited significant mutual correlations except for 1,4-phthalic acid, which was probably primarily emitted from combustion of solid wastes containing polyethylene terephthalate plastics. Spatial patterns and correlations with typical source tracers suggested that C14–C32fatty acids were mainly primary while dicarboxylic and aromatic acids were largely secondary. Principal component analysis resolved six sources including biomass burning, natural higher plant wax, two mixed anthropogenic and two secondary sources; further multiple linear regression revealed their contributions to individual organic acids. It turned out that more than 70% of C14–C18fatty acids were attributed to anthropogenic sources, about 50%–85% of the C20–C32fatty acids were attributed to natural sources, 80%–95% of dicarboxylic acids and 1,2-phthalic acid were secondary in contrast with that 81% of 1,4-phthalic acid was primary.     

Debromination of decabromodiphenyl ether by organo-montmorillonite-supported nanoscale zero-valent iron：Preparation, characterization and influence factors

An organo-montmorillonite-supported nanoscale zero-valent iron material(M-NZVI) was synthesized to degrade decabromodiphenyl ether(BDE-209). The results showed that nanoscale zero-valent iron had good dispersion on organo-montmorillonite and was present as a core-shell structure with a particle size range of nanoscale iron between 30–90 nm, characterized by XRD, SEM, TEM, XRF, ICP-AES, and XPS. The results of the degradation of BDE-209 by M-NZVI showed that the efficiency of M-NZVI in removing BDE-209 was much higher than that of NZVI. The efficiency of M-NZVI in removing BDE-209 decreased as the pH and the initial dissolved oxygen content of the reaction solution increased, but increased as the proportion of water in the reaction solution increased.     

Phosphatase activity and culture conditions of the yeast Candida mycoderma sp. and analysis of organic phosphorus hydrolysis ability

Orthophosphate is an essential but limiting macronutrient for plant growth. About 67% cropland in China lacks sufficient phosphorus, especially that with red soil. Extensive soil phosphorus reserves exist in the form of organic phosphorus, which is unavailable for root uptake unless hydrolyzed by secretory acid phosphatases. Thus, many microorganisms with the ability to produce phosphatase have been exploited. In this work, the activity of an extracellular acid phosphatase and yeast biomass from Candida mycoderma was measured under different culture conditions, such as pH, temperature, and carbon source. A maximal phosphatase activity of 8.47 × 10^5±0.11× 10^5 U/g was achieved by C. Mycoderma in 36 hr under the optimal conditions. The extracellular acid phosphatase has high activity over a wide pH tolerance range from 2.5 to S.0 （optimum pH 3.5）. The effects of different phosphorus compounds on the acid phosphatase production were also studied. The presence of phytin, lecithin or calcium phosphate reduced the phosphatase activity and biomass yield significantly. In addition, the pH of the culture medium was reduced significantly by lecithin. The efficiency of the strain in releasing orthophosphate from organic phosphorus was studied in red soil （used in planting trees） and rice soil （originating as red soil）. The available phosphorus content was increased by 230% after inoculating 20 days in rice soil and decreased by 50% after inoculating 10 days in red soil. This work indicates that the yeast strain C. mycoderma has potential application for enhancing phosphorus utilization in plants that grow in rice soil.     

Primary neuronal-astrocytic co-culture platform for neurotoxicity assessment of di-(2-ethylhexyl) phthalate

Plastics such as polyvinyl chlorides （PVC） are widely used in many indoor constructed environments; however, their unbound chemicals, such as di-（2-ethylhexyl） phthalates （DEHP）, can leach into the surrounding environment. This study focused on DEHP＇s effect on the central nervous system by determining the precise DEHP content in mice brain tissue after exposure to the chemical, to evaluate the specific exposure range. Primary neuronal-astrocyte co-culture systems were used as in vitro models for chemical hazard identification of DEHP. Oxidative stress was hypothesized as a probable mechanism involved, and therefore the total reactive oxygen species （ROS） concentration was determined as a biomarker of oxidative stress. In addition, NeuriteTracer, a neurite tracing plugin with ImageJ, was used to develop an assay for neurotoxicity to provide quantitative measurements of neurological parameters, such as neuronal number, neuron count and neurite length, all of which could indicate neurotoxic effects. The results showed that with 1 nmol/L DEHP exposure, there was a significant increase in ROS concentrations, indicating that the neuronal-astrocyte cultures were injured due to exposure to DEHP. In response, astrocyte proliferation （gliosis） was initiated, serving as a mechanism to maintain a homeostatic environment for neurons and protect neurons from toxic chemicals. There is a need to assess the cumulative effects of DEHP in animals to evaluate the possible uotake and effects on the human neuronal system from exoosure to DEHP in the indoor environment.